Motion control · Free · ₹0

Allen-Bradley Kinetix Servo Motion with Studio 5000

Rockwell motion from the axis tree to cams: the Kinetix family and Motion Analyzer, axis setup and hook-up tests, the RSLogix 5000 servo series, command operation and control bits, tuning with S-curves and trends, gearing and MRP, registration and event tasks, MAPC, MCCP and MAOC cams, coordinated and SFC motion, Kinetix 6000, 5500, 5300, 5700 and Sercos hardware, and diagnostics.

4.8EDWartens India · 524+ reviews 12 modules 17h 7m of video English · self-paced

What you will learn

Set up Kinetix axes in Studio 5000, run hook-up tests and direct commands, understand servo command operation and control bits, tune with S-curves and trends, gear axes with MAG and MRP, use registration with MAR and event tasks, build position cams with MAPC and MCCP and output cams with MAOC, run coordinated and SFC motion, commission Kinetix hardware and diagnose motion faults.

  • Size and choose Kinetix drives and set up axes
  • Run hook-up tests, direct commands and the servo command sequence
  • Tune with S-curves, trends and fault protection
  • Gear axes and use registration with event tasks
  • Build position and output cams and coordinated motion
  • Commission Kinetix hardware and diagnose faults

Course content

12 modules · 79 lessons · 17h 7m

In order, at whatever pace suits you. Each module ends with a practice task that builds on the last, and a short quiz.

  1. 01The Kinetix Family, Modernisation and Motion Analyzer52m
  2. 02Servo Axis Setup and Hook-Up Test1h 13m
  3. 03RSLogix 5000 Servo Controls Series1h 59m
  4. 04Servo Command Operation, Control Bits and Order of Operation1h 53m
  5. 05Tuning: S-Curves, Accel, Decel, Jerk and Trends1h 5m
  6. 06Gearing and MRP47m
  7. 07Registration and Event Tasks2h 5m
  8. 08Cams: MAPC, MCCP, Excel Profiles and MAOC3h 18m
  9. 09Coordinated Motion, SFC Motion and MATC1h 17m
  10. 10Kinetix Hardware: 6000, 5500, 5300, 5700, Sercos and Firmware2h 8m
  11. 11Troubleshooting and Diagnostics46m
  12. 12Final Assessment14m

Requirements

Who it is for
Intermediate. The free servo and motion course and the Studio 5000 course are the prerequisites.
Software
Studio 5000 Logix Designer (trial) with Logix Emulate for virtual axes
Hardware
None required. A Kinetix 5500 or 5300 with one motor makes the hardware modules real.

Allen-Bradley Kinetix Servo Motion with Studio 5000 at a glance

Allen-Bradley Kinetix Servo Motion with Studio 5000 is a free, self-paced online motion control course from EDWartens India with 12 modules, 17h 7m of video lessons, written notes, practice tasks and assessments, and an optional verifiable certificate.

Price
₹0, free for good. No trial, no card.
Format
12 self-paced modules, 17h 7m of video, written notes, a quiz per module and a final assessment.
Level
Intermediate. Intermediate. The free servo and motion course and the Studio 5000 course are the prerequisites.
Brand
Allen-Bradley
Software
Studio 5000 Logix Designer (trial) with Logix Emulate for virtual axes
Hardware
None required. A Kinetix 5500 or 5300 with one motor makes the hardware modules real.
Certificate
Optional EDWartens Certificate of Completion, ₹700, verifiable by code. Not a vendor credential.
Video lessons by
Shane Welcher SR, Rockwell Automation (independent creators, credited below)
Language
English

A shareable EDWartens certificate

Finish every module and pass the final assessment, and you can buy a certificate for ₹700. It carries a unique verification code on a public page anyone can check, so it stands up when a recruiter looks it up.

  • Add it to your LinkedIn profile in one click
  • Link it from a CV or portfolio, the URL is permanent
  • Publicly verifiable by code, not a PDF anyone can edit
  • Issued by EDWartens India, the training centre itself

The course itself stays free whether or not you ever buy one.

Stuck? Ask a practising engineer

A free course usually means a comment section and hope. This one does not. Every module has an Ask-your-trainer panel that reaches the same engineers who teach our paid programme: people who commission panels for a living, not moderators.

  • Questions answered in the context of the module you are on
  • The same engineers who teach the AEP programme
  • Career tools, CV help and public job listings included
  • Your progress and notes stay in your account for good

Pairs well with

PLC programming · FreeAllen-Bradley Studio 5000CompactLogix and ControlLogix from the wiring up: tags, instructions, timers, data, drives, messaging and Modbus, in Rockwell's Studio 5000.PLC programming · FreeAllen-Bradley RSLogix 500 and MicroLogixThe MicroLogix and SLC 500 on real hardware: file-based addressing, every instruction group, analog scaling, faults and forces, in RSLogix 500.PLC programming · FreeAllen-Bradley Micro800 with Connected Components WorkbenchThe Micro820/850 from wiring to motion: CCW, the simulator, bit logic, timers, counters, analog, UDFBs, high-speed counters, PTO motion, PowerFlex and Logix messaging, Modbus TCP, PID, and migration from MicroLogix.SCADA · FreeFactoryTalk View Site Edition SCADARockwell's plant SCADA: applications and clients, displays and navigation, Logix tag references, global objects, FactoryTalk Alarms and Events, TrendPro, data logging and databases, RecipePro+, security and e-signatures, VBA, ViewPoint, backup and migration.

Common questions

How is this different from the servo and motion course?

That course introduces servos across brands; this one goes deep on Rockwell Kinetix: cams, registration, Sercos, firmware and diagnostics.

Do I need a drive?

No. Virtual axes in Logix Emulate run every exercise except the hardware module, which is demonstrated on video.

Is the Kinetix 6000 still relevant?

Yes: thousands run in Indian packaging plants and the troubleshooting skills transfer to the 5500 and 5700.

Is the course really free?

Yes. Every module, practice task and assessment. You create an account so your progress is saved and the assessments can be marked. The certificate is the only paid item, and only if you want it.

What certificate do I get, and is it a vendor qualification?

An EDWartens Certificate of Completion, issued when you pass the final assessment, with a verification code anyone can check. It is not a vendor credential and is never described as one.

Who made the video lessons?

The creators named in the Credits block at the foot of this page, on their own YouTube channels. EDWartens did not make the videos and the creators are not affiliated with EDWartens. What EDWartens wrote is the study plan, the notes, the practice tasks and the assessments.

Credits

Who made the video lessons

The video lessons in this course were created by the people below, not by EDWartens. Every lesson streams from its creator's own YouTube channel; EDWartens neither hosts nor sells that footage, and the creators are not affiliated with EDWartens and do not endorse this course. What EDWartens wrote is the study plan, the notes, the practice tasks and the assessments.

If you are one of these creators and would like a lesson removed or credited differently, write to info@wartens.com.