Classroom course · Electronic City
Industrial Automation Training Institute in Bangalore
EDWartens teaches industrial automation in a classroom in Electronic City, Bangalore, through the Automation Engineer Program (AEP): PLC programming across 20 PLC brands, SCADA, HMI, drives, measuring instruments, PID basics and control panel design. It lasts 3 to 12 months in assessment-gated phases, and the fee is agreed per candidate.
Industrial automation at a glance
- Format
- Classroom, Electronic City
- Duration
- 3 to 12 months
- Classroom sessions
- 67, in 6 phases
- PLC brands
- 20
- Panel design
- Phase 1
- Next batch
- Ask admissions
- Fee
- Agreed per candidate
Coverage
What industrial automation covers in the AEP
Each topic below is taught in named sessions of the course schedule: 67 classroom sessions in six phases, each ending with a gate or exam.
| Topic | Where in the AEP | What you learn |
|---|---|---|
| PLC programming | Phases 0 to 4: core concepts, Siemens in depth, Allen-Bradley in depth, then the other brands | 20 PLC brands, including Siemens, Allen-Bradley, Mitsubishi, Delta, ABB and Schneider Electric. Ladder first, then Function Block Diagram and Structured Text, two of the IEC 61131-3 languages described by PLCopen. |
| SCADA | D27 Siemens SCADA (WinCC) I (phase 2), D28 Siemens SCADA (WinCC) II (phase 2), D38 FactoryTalk View I (phase 3), D39 FactoryTalk View II (phase 3), D40 FactoryTalk View III (phase 3) and D52 SCADA and HMI: InTouch, iFix, Movicon, INVT (phase 4) | SCADA screens and navigation, alarms, trends, user administration, data logging and reports. |
| HMI | D25 Siemens HMI I (phase 2) and D26 Siemens HMI II (phase 2) | HMI device setup, screens and navigation, alarms, trends and user administration. |
| Drives (VFD) | D11 Drives and Industry 4.0 (phase 1) and D29 SINAMICS VFD (phase 2) | VFD basics and parameter setting, commissioning, and PLC to VFD integration. |
| Measuring instruments | D5 Measuring instruments (phase 0) | Measuring instruments and electrical safety. |
| PID basics | D24 Analog and PID introduction (phase 2) | Analog inputs and an introduction to PID control. |
| Control panel design | D8 Engineering drawing and design (phase 1), D9 Panel design (phase 1) and D10 Control logic and wiring (phase 1) | Engineering drawing and symbols, control panel layout, and starter logic and wiring. More below. |
| Industrial communication and IIoT | D6 Automation fundamentals (phase 0) and D54 Pneumatics and IIoT (phase 4) | Communication protocols, then OPC UA, MQTT, edge devices and digital twins. |
| DCS | D53 Drives, DCS and robotics (phase 4) | DCS concepts; DCS platforms are not counted among the PLC brands. DCS training in Bangalore: concepts in the AEP. |
The full syllabus, phase by phase: PLC course in Bangalore: syllabus and duration.
Panel design
Control panel design and wiring in the AEP
Electrical control panel design is part of phase 1, basic engineering, before the first PLC brand is taught in depth. You read and draw engineering drawings and symbols, lay out a control panel, then work through star-delta and DOL starter logic and wiring.
- D8 Engineering drawing and design
- D9 Panel design
- D10 Control logic and wiring
The phase ends with evaluation gate 1: a practical panel drawing and starter circuit wiring.
To start before you join, take the free control panel design and building course online.
Robots
Robots in an automated cell
Robot programming (FANUC, ABB, KUKA and others) is taught in free online courses; the classroom AEP covers how a PLC commands and interlocks a robot cell.
For industrial automation and robotics together, see Robotics training in Bangalore: PLC to robot cell.
Choosing
How to choose an industrial automation institute in Bangalore
- Ask what you will build and on what: wired panels, simulators or both, and how many hours you spend on them.
- Ask for the syllabus phase by phase, and how your progress is assessed before you move on.
- Read any placement promise in writing: its conditions, how long it runs and what happens if it is not met.
- Ask for the fee in writing, what it includes, and the cancellation terms before you pay.
- Check that the batch start date you are given is a real, scheduled batch.
- Visit the centre during a class and talk to people training there now.
- Ask who issues the certificate and what it says.
Formats compared, from government courses to classroom programmes: how to choose a PLC training institute in Bangalore.
Batches
Upcoming AEP batches
Ask admissions for the next batch date: contact us or call +91 96068 68686.
Short on time?
PGDIA: four weeks, ₹26,000 including GST
Market price ₹47,200You save ₹21,200 (45%)
24 classroom days of 4 hours in Electronic City, Bangalore on Siemens and Delta PLC, HMI and SCADA, plus about 154 hours of guided self-study, including full lessons from our free courses, and interview preparation.
Prefer to learn from home? EPGDIA is the same course, live online, ₹24,000 including GST.
Market price is the median published fee, including GST, of three comparable hands-on industrial automation programmes in South India: IMTMA, Bangalore, Foundation Course in Industrial Automation, 4 weeks full time, ₹42,480 (₹36,000 + GST, 2019 notice); ASAP Kerala, Industrial Automation, 300 hours, ₹47,200 (including GST, 2026); NIELIT, PG Programme in Industrial Automation System Design, ₹59,000 (₹50,000 + tax, 2025). Checked 13 October 2026. It is not a price EDWartens has charged for PGDIA.
Paid in full before the course starts; there are no instalments. If you withdraw before the course starts, the fee is refunded in full. Once the course has started, it is not refundable. Read the full terms.
Placement
Placement support and the written guarantee
Interview and resume preparation is phase 5 of the AEP, and interview drives run in the placement phase. Job guarantee or programme fee refunded (conditions apply). It runs for the nine months after you complete the programme. See the placement policy.
PLC training with a written job guarantee sets out the conditions in full.
Pay
What automation engineers earn
Reported pay across employers, as AmbitionBox publishes it. This is the market, not an EDWartens outcome.
Market data, not EDWartens placement figures
| Role and place | 0 to 1 year | 1 to 3 years | Average, all levels | Source |
|---|---|---|---|---|
| PLC programmer, India | ₹2.6 to 2.9 L183 salaries | ₹3.0 to 3.3 L1.1k salaries | ₹4.5 L2.5k salaries | AmbitionBoxupdated 5 Oct 2026 |
| PLC programmer, Bengaluru | ₹3.1 L10 salaries | ₹3.5 to 3.9 L97 salaries | ₹4.8 L198 salaries | AmbitionBoxupdated 25 Sep 2026 |
| SCADA engineer, India | No figure | ₹3.6 to 4.0 L380 salaries | ₹5.2 L996 salaries | AmbitionBoxupdated 2 Oct 2026 |
| SCADA engineer, Bengaluru | No figure | No figure | ₹5.6 L91 salaries | AmbitionBoxupdated 2 Oct 2026 |
Gross pay a year in lakh rupees, as reported to AmbitionBox by people in these roles across employers, read 5 Oct 2026. These are market figures, not what EDWartens engineers earn, and an offer depends on the employer, the role and the candidate. Figures resting on fewer than 5 salaries are not shown.
AmbitionBox also publishes reported pay for automation engineers.
Free to start
Free online automation courses for Bangalore
Try the subject before you join a batch. Each course is free to learn in full, online and self-paced, with written notes, practice tasks and a final assessment, and an optional verifiable certificate.
- Siemens · FreeSiemens TIA Portal
- Allen-Bradley · FreeAllen-Bradley Studio 5000
- Inductive Automation · FreeIgnition SCADA by Inductive Automation
- Drives · FreeVariable Frequency Drives: Wiring, Programming, PLC and Network Control
- Instrumentation · FreeInstrumentation for PLC Engineers
- Siemens · FreeSiemens TIA Portal Program Structure and Best Practice
- CODESYS · FreeCODESYS and IEC 61131-3 Programming
- KUKA · FreeKUKA Robot Programming with KUKA.Sim, smartPAD and WorkVisual
Get started
Start your engineering career
Tell us where you are now. A career counsellor calls you back to book your free assessment.
- Job guarantee in writing, conditions applyA job offer, or your fees refunded, on the terms of our placement policy.
- A real counsellor, not a chatbotOne call, usually the same day.
- No obligation, no spamWe call once. You decide from there.
Questions
Industrial automation course: questions
What it covers, how long it takes, who can join and how placement works.
Ask us insteadAn industrial automation course teaches how machines and plants are controlled: PLC programming, SCADA and HMI screens, drives, instruments and the control panels that hold them. At EDWartens it is the Automation Engineer Program (AEP), taught in a classroom in Electronic City, Bangalore.
The AEP is a classroom programme in Electronic City and lasts 3 to 12 months, depending on the phases a candidate completes. Ask admissions for the next batch date. The classroom part is 67 sessions in six phases, each ending with a gate or exam.
The course assumes no automation experience: phase 0 starts from engineering physics and electrical fundamentals. Admissions confirms with each candidate, before enrolment, whether their qualification fits. Freshers and diploma holders: edwartens.co.in/plc-training-for-freshers.
Yes. Phase 1 covers engineering drawing, control panel design and starter logic and wiring, and ends with an evaluation that includes a practical panel drawing and starter circuit wiring.
No. Software test automation means writing scripts that test software. Industrial automation means controlling physical machines and processes with PLCs, SCADA, HMIs, drives and instruments. This course is industrial automation.
20 PLC brands, including Siemens, Allen-Bradley, Mitsubishi, Delta, ABB, Schneider Electric, Omron and Keyence. SCADA software, including WinCC, FactoryTalk View and Ignition, and DCS systems are listed separately and not counted among the PLC brands.
Robot programming (FANUC, ABB, KUKA and others) is taught in free online courses; the classroom AEP covers how a PLC commands and interlocks a robot cell. Details: edwartens.co.in/robotics-training-bangalore.
The AEP carries a written job guarantee with conditions (all phases completed, assessments passed, every arranged interview attended, no suitable offer declined: that is a role in industrial automation paying at least ₹15,000 a month, and not below the applicable minimum wage, anywhere in India); if a candidate who meets them is not placed within nine months of completing Phase 5, the programme fee you paid is refunded within 30 working days of verification, excluding GST already remitted. Full terms: edwartens.co.in/placement-policy.
Keep reading
Related pages
PLC course in Bangalore
Syllabus, duration, brands and batches.
02PLC SCADA training in Bangalore
SCADA platforms, projects, and how PLC, SCADA and DCS differ.
03Robotics training in Bangalore
PLC to robot-cell integration.
04Automation Engineer Program
The classroom programme behind this course.
05PLC course fees in Bangalore
How the fee is agreed and paid in instalments.
06Placements
Engineers placed, by name, photograph and batch year.
