Instrumentation · Free online course

Instrument Calibration, Loop Checks and Commissioning

Calibrate pressure, temperature, level and flow transmitters to a written procedure, then run the cold and hot loop checks that hand a plant over: calibration vocabulary and TUR, the 5-point as-found and as-left test, DP flow and level, RTDs and thermocouples, 4-20 mA and HART, switches, valve stroke checks, loop folders and calibration management.

  • 13 modules
  • 7h 18m of video
  • Beginner
  • English
  • ₹0, free
  • Lab practice in your browser
Instrument Calibration, Loop Checks and Commissioning course cover

₹0Free for good

Worth ₹4,499 by length and depth against classroom training. It has always been free; that is not a former price.

No card. Checkout takes a minute and gives you a receipt.

Certificate ₹499, optional. The course is free either way.

Overview

About Instrument Calibration, Loop Checks and Commissioning

Calibrate pressure, temperature, level and flow transmitters to a written procedure, then run the loop checks that hand a plant over.

Instrument Calibration, Loop Checks and Commissioning is a free, self-paced online course from EDWartens for instrument technicians, diploma and engineering graduates, and E&I commissioning staff in India and the Gulf. It has 13 modules and 7h 18m of video lessons, with written notes, a practice task per module, a practical project and a final assessment of 15 questions (pass mark 60%). Learning costs nothing and needs only a free account. The optional EDWartens Certificate of Completion, verifiable by code, is a one-off ₹499 inclusive of GST for learners in India; it is not a vendor credential. Updated 1 November 2026.

Who it is for: Instrument technicians, diploma and engineering graduates, and E&I commissioning staff in India and the Gulf

This course includes

  • 7h 18m of video lessons
  • 13 modules with written notes and diagrams
  • One final assessment: 15 questions, pass mark 60%
  • Ask-an-engineer support from practising engineers
  • Lifetime access, the course does not expire
  • Optional verifiable certificate when you finish
  1. Step 1 of 3

    Learn the 13 modules

    7h 18m of video lessons, written notes and a practice task per module, at your own pace.

  2. Step 2 of 3

    Pass the final assessment

    15 questions drawn from every module, pass mark 60%, 3 attempts.

  3. Step 3 of 3

    Take the certificate, if you want it

    Optional, paid once, only if you choose it. The course stays free either way.

    See the certificate and its price

A look inside

Instrument Calibration, Loop Checks and Commissioning: Syllabus at a glance
Syllabus at a glance
Instrument Calibration, Loop Checks and Commissioning: What you will be able to do
What you will be able to do
Instrument Calibration, Loop Checks and Commissioning: Tools and credits
Tools and credits

From the lessons

  • Instrumentation Calibration - [An Introduction]

    Calibration vocabulary: range, span, accuracy, uncertainty and TUR

    by Instrumentation & Control

  • How to calibrate HART pressure transmitters - Beamex

    Pressure and DP transmitters: hand pump, reference gauge and square-root flow

    by BeamexCalibration

  • Wet Leg Level Transmitter - Purpose, Operation, Set - Up.

    Level: DP level with wet and dry legs, suppression, elevation and guided-wave radar

    by ECAS

  • What is HART Protocol?

    HART: what it carries, trim versus re-range, communicators and DD tools

    by RealPars

  • Calibrating a Fisher™ 3582 Positioner - Zero and Span

    Control valve stroke check and positioner calibration

    by Fisher Valves & Instruments

  • Pre-Commissioning vs Commissioning - What Takes Place During Each Stage?

    Hot loop check, pre-commissioning and handover records

    by ICxA

Lesson frames belong to the creators named in the Credits and are shown from YouTube.

What you learn

What you will be able to do

By the end you will be able to:

  • Run a 5-point as-found and as-left calibration and decide pass or fail
  • Calibrate pressure, DP flow, temperature and DP level transmitters
  • Work 4-20 mA loop maths and a loop voltage budget
  • Stroke-check a control valve
  • Run cold and hot loop checks and fill in the records

How it works

How this course works

  1. Watch the lessons

    Short video lessons, one module at a time, at your own pace.

  2. Read the notes

    Open the Reading tab for the written notes and diagrams of the module.

  3. Practise in the 3D labOptional

    Try the module in the free 3D lab, in your browser.

  4. Check yourself

    Answer the questions to see what stuck before you move on.

  5. Final assessment

    Pass the final once you have been through the modules.

  6. Certificate, if you want oneOptional

    Optional, with a page anyone can use to verify it.

Syllabus

Course content, module by module

In order, at whatever pace suits you. Each module ends with a practice task that builds on the last.

Modules
13
Video lessons
40
Of video
7h 18m
Final questions
15
  1. 01

    Calibration vocabulary: range, span, accuracy, uncertainty and TUR

    4 lessons · 20m
  2. 02

    The 5-point as-found and as-left calibration and the certificate, with lab practice:

    3 lessons · 25m
  3. 03

    Pressure and DP transmitters: hand pump, reference gauge and square-root flow, with lab practice:

    3 lessons · 32m
  4. 04

    Temperature: RTD and thermocouple checks, dry blocks and cold-junction compensation

    4 lessons · 28m
  5. 05

    Level: DP level with wet and dry legs, suppression, elevation and guided-wave radar

    4 lessons · 31m
  6. 06

    4-20 mA loop maths, loop power, the 250 ohm resistor and loop calibrators

    3 lessons · 1h 5m
  7. 07

    HART: what it carries, trim versus re-range, communicators and DD tools

    4 lessons · 1h 25m
  8. 08

    Switches and trips: set point, deadband and alarm testing

    3 lessons · 17m
  9. Final assessment · 15 questions, pass mark 60%

3D lab

Practise in the 3D lab

Calibrate a pressure transmitter as found and as left, check a 4 to 20 mA loop, and stroke-test a control valve.

Calibrate 4 to 20 mAWatch

Optional. Skip it whenever you like: it never blocks your progress or your certificate.

Project

The course project

Optional practice that ends in the kind of job the course prepares you for, with the documents that go with it.

About 10 hours

Calibrating five transmitters and loop-checking a level loop on a condensate stabiliser before start-up

You act as the instrument technician on a gas plant expansion. You calibrate five transmitters with as-found and as-left records, build a calibration register, loop-check the bottoms level loop and raise the punch list. The sample pack shows each document for unit 21.

This project at a glance
  1. 7documents in the pack
  2. 5steps to follow
  3. Laboptional: in the 3D lab
  4. 6things to hand in
  5. 10 hof work, at your pace

Do it in the lab: 4 steps.

Sample document pack, 7 documents, filled in for the scenario

  • Instrument indexUnit 21 instrument index, calibrated instruments
  • Loop drawingLoop diagram LIC-2120 bottoms level control
  • Calibration recordPT-2104 stabiliser pressure transmitter
  • Calibration recordTT-2110 bottoms temperature, Pt100 and transmitter
  • RegisterUnit 21 transmitters, calibration status and intervals
  • Loop checkLIC-2120 bottoms level control
  • Punch listUnit 21 instruments, open items before start-up

Read inside the course and download as a workbook. The project is optional practice, marked when you submit it; the certificate needs only the modules and the final assessment.

Tools

Software, hardware and lessons

Software

A spreadsheet (Excel, Google Sheets or LibreOffice Calc) for the calibration sheets and register. No calibration software is needed.

Hardware

None required. A loop calibrator or process meter, a hand pump and a spare transmitter make the practice tasks real, but every task can be done on paper.

Who it is for

Beginner to intermediate. For instrument technicians, diploma and engineering graduates in instrumentation, electrical or electronics, and plant staff moving into commissioning. You should know what a transmitter is; arithmetic with a calculator is enough.

Video lessons by

  • Beamex
  • Instrumentation & Control
  • RealPars
  • Calibration Academy
  • Precision Digital
  • Fisher (Emerson)

Independent creators, credited in full under Credits.

Software you need

What to download, where from, what it costs and how to install it. Every link goes to the maker's own site, never a mirror.

Nothing to install

A spreadsheet (Excel, Google Sheets or LibreOffice Calc) is enough for the calibration sheets, the register and the loop check.

Optional

Useful, not needed to finish the course.

  1. 01

    LibreOffice

    The Document Foundation

    Free
    Runs on
    Windows 10 or 11, macOS 11 or newer (Intel or Apple silicon), Linux
    Account
    None needed
    Size
    up to 1.5 GB of disk space on Windows

    LibreOffice is free, open-source software under the Mozilla Public License 2.0, for any use including business. Calc is its spreadsheet.

    Official download pagelibreoffice.org

Checked against each maker's own page on 27 September 2026. Trial lengths and editions change; the maker's page is the final word.

What you walk away with

Your certificate for Instrument Calibration, Loop Checks and Commissioning

Finish the course, pass the final, and this is the document with your name on it.

Sample Wartens Certificate of Completion for Instrument Calibration, Loop Checks and Commissioning, issued through the EDWartens training portal
Sample. The issued certificate carries your name, your final score, a unique certificate ID and its own QR code.
  • Verifiable by anyone

  • Adds to LinkedIn in one click

  • QR code on the certificate

  • Names what you can do

  • A permanent link

  • Earned, not attended

Learning is free. The certificate is optional.

Add it now and pay only when you have finished the course, or come back for it later. One-off, US$23.99, with a receipt.

Issued by Wartens Ltd (England and Wales, company no. 15262249) through the EDWartens training portal, as a Certificate of Completion for this self-paced course. Sold in India by Wartens Automation Private Limited. It is not a vendor certification, a university award or a CPD-accredited activity, and it does not certify competence on live equipment. Delivered electronically; see the refund policy.

Practise what you learn in the free 3D lab

Technical work is judged on what you can do: wiring, commissioning, finding a fault. Doing a task yourself teaches more than watching it a second time, and a lab lets you try it safely before you meet real equipment. It does not replace working on real hardware.

  • Practise safely, so a mistake costs nothing.
  • The lab checks your work like a site test, so you know when it is right.
  • Free, in your browser, with nothing to install.

Why learn with EDWartens

What you get with this course.

  • Free from the first lesson to the final assessment.
  • Practice in a free 3D lab in your browser, with nothing to install.
  • Video lessons with written notes and a project.
  • An optional certificate that anyone can verify online.

FAQ

Common questions

Who is the Instrument Calibration, Loop Checks and Commissioning course for?

Instrument technicians, diploma and engineering graduates in instrumentation, electrical or electronics, and plant and E&I staff moving into commissioning, in India, the Gulf and elsewhere. You should know what a transmitter is; arithmetic with a calculator is enough.

Does this course prepare me for the ISA CCST?

It covers a good part of the ground the ISA Certified Control Systems Technician (CCST) Level I exam covers, such as calibration, loop checking and commissioning, but it is not ISA preparation material and it does not award the CCST. The EDWartens certificate is a certificate of completion.

Do I need calibration equipment or software?

No. Every practice task and the project can be done on paper or in a spreadsheet with the readings given. A loop calibrator, a hand pump and a spare transmitter make the tasks more real if you have them.

Which standards does it follow?

It works to common plant practice and names the standards where they apply: IEC 60751 for Pt100 sensors, NAMUR NE 43 for failure currents, ISO/IEC 17025 for calibration laboratories and traceability, and the HART protocol. It paraphrases them and does not reproduce their text.

How long does the Instrument Calibration, Loop Checks and Commissioning course take?

About 10.8 hours of video lessons, notes and practice, taken at your own pace, leaving out three long optional videos; the videos alone are about 7.3 hours, or about 4.7 hours without those three. The optional project, calibrating five transmitters and loop-checking a level loop on a gas plant unit, takes about 10 hours more.

Is the Instrument Calibration, Loop Checks and Commissioning course really free?

Yes. Every module, the notes, the project and the final assessment. The only paid item is the certificate, if you want it.

What certificate does the Instrument Calibration, Loop Checks and Commissioning course give?

An EDWartens Certificate of Completion, issued when you pass the final assessment, with a number anyone can verify on our site. It is not an ISA certificate or a calibration laboratory accreditation.

What jobs does it lead to?

Instrument technician, calibration technician and E&I commissioning technician roles in oil and gas, power, chemicals, pharmaceuticals and water, including the many commissioning and maintenance roles in the Gulf. Go on to Industrial Instrumentation and Process Control, or Safety Instrumented Systems and SIL to IEC 61511.

Do I have to use the lab?

No. The lab is optional practice. You can skip it whenever you like, and it never blocks your progress, the final assessment or your certificate.

Is the lab free?

Yes. Every lab level for this course opens in your browser, free, with nothing to install.

Is the Instrument Calibration, Loop Checks and Commissioning course free in India, and what does the certificate cost?

Yes. Learning costs ₹0 in India: every module, the written notes, the practice tasks and the final assessment, with no card and no trial period. The only paid item is the optional EDWartens Certificate of Completion, ₹499 including GST for this beginner course, paid in rupees through Razorpay, and only if you want it after passing the final assessment.

Is there classroom instrumentation training in India as well?

Yes. EDWartens India runs the Automation Engineer Program (AEP), a classroom programme at its Electronic City centre in Bangalore. The Automation Engineer Program (AEP) covers PLC, SCADA, HMI, drives, measuring instruments, PID basics and control panel design, taught in person at our Electronic City centre. This free course is separate and fully online; it is a good way to try the subject before deciding on classroom training. Details are at edwartens.co.in/automation-training-bangalore, and the programme itself at edwartens.co.in/courses/aep.

What topics does the Instrument Calibration, Loop Checks and Commissioning course cover, module by module?

The Instrument Calibration, Loop Checks and Commissioning course has 13 modules. It opens with "Calibration vocabulary: range, span, accuracy, uncertainty and TUR", goes through "The 5-point as-found and as-left calibration and the certificate", "Level: DP level with wet and dry legs, suppression, elevation and guided-wave radar", "Control valve stroke check and positioner calibration" and "Calibration management: intervals, ISO/IEC 17025 and records" and ends with "Final Assessment". The full list with minutes is under "What you learn" on this page.

What can I do after the Instrument Calibration, Loop Checks and Commissioning course?

After the Instrument Calibration, Loop Checks and Commissioning course: Calculate span, percent-of-span error and a test uncertainty ratio, and judge whether a reference is good enough; Run a 5-point as-found and as-left calibration and write a record someone can sign; Calibrate pressure and DP flow transmitters, including square-root flow. These are the practical outcomes the course is written around, and the final assessment of 15 questions checks them.

What software and hardware do I need for the Instrument Calibration, Loop Checks and Commissioning course, and does it cost anything?

For the Instrument Calibration, Loop Checks and Commissioning course, software: A spreadsheet (Excel, Google Sheets or LibreOffice Calc) for the calibration sheets and register. No calibration software is needed. Hardware: none required. A loop calibrator or process meter, a hand pump and a spare transmitter make the practice tasks real, but every task can be done on paper. The course itself is free.

Is the Instrument Calibration, Loop Checks and Commissioning course suitable for me, and what level is it?

Instrument Calibration, Loop Checks and Commissioning is rated beginner. Beginner to intermediate. For instrument technicians, diploma and engineering graduates in instrumentation, electrical or electronics, and plant staff moving into commissioning. You should know what a transmitter is; arithmetic with a calculator is enough. It is written for instrument technicians, diploma and engineering graduates, and E&I commissioning staff in India and the Gulf, and has 7h 18m of video lessons at your own pace.

Which jobs use the skills from the Instrument Calibration, Loop Checks and Commissioning course?

Skills from the Instrument Calibration, Loop Checks and Commissioning course (for example: calculate span, percent-of-span error and a test uncertainty ratio, and judge whether a reference is good enough) are used in instrument technician work. The course gives you practical evidence of the skill; it does not promise a job, and employers decide on experience and interview.

All course facts
Price
₹0, free for good. No trial, no card. Comparable classroom training of this length costs about ₹4,499.
Who it is for
Instrument technicians, diploma and engineering graduates, and E&I commissioning staff in India and the Gulf
Format
13 self-paced modules, 7h 18m of video, written notes, a practice task per module and one final assessment.
Level
Beginner. Beginner to intermediate. For instrument technicians, diploma and engineering graduates in instrumentation, electrical or electronics, and plant staff moving into commissioning. You should know what a transmitter is; arithmetic with a calculator is enough.
Brand
Vendor-neutral
Software
A spreadsheet (Excel, Google Sheets or LibreOffice Calc) for the calibration sheets and register. No calibration software is needed.
Hardware
None required. A loop calibrator or process meter, a hand pump and a spare transmitter make the practice tasks real, but every task can be done on paper.
Certificate
Optional EDWartens Certificate of Completion, ₹499 inclusive of GST for learners in India, verifiable by code. Not a vendor credential.
Video lessons by
Beamex, Instrumentation & Control, RealPars, Calibration Academy, Precision Digital, Fisher (Emerson) (independent creators, credited below)
Language
English
Last updated
1 November 2026

More free courses: Free instrumentation and process control courses

Classroom course, Bangalore

Industrial automation course in Bangalore

The Automation Engineer Program (AEP) covers PLC, SCADA, HMI, drives, measuring instruments, PID basics and control panel design, taught in person at our Electronic City centre.

Credits

Who made the video lessons

The video lessons in this course were created by the people below, not by EDWartens. Every lesson streams from its creator's own YouTube channel; EDWartens neither hosts nor sells that footage, and the creators are not affiliated with EDWartens and do not endorse this course. What EDWartens wrote is the study plan, the notes, the practice tasks and the assessments.

  • Beamexthe calibration lessons: pressure transmitters and a pressure loop, HART pressure transmitters, RTD temperature transmitters and Pt100 sensors, pressure and temperature switches, a HART valve linearity test, the long lesson on calibrating and trimming HART transmitters, and the webinar on how often instruments should be calibrated
  • Instrumentation & Controlthe introduction to instrumentation calibration, the guided-wave radar echo curve, sourcing and simulating 4-20 mA with a process meter, the pressure transmitter re-range workshop, reading a loop diagram and common 4-20 mA loop faults
  • RealParsthe lessons on what an instrument calibrator is and what the HART protocol is
  • Calibration AcademyDP flow transmitter zero and span, thermocouple cold-junction compensation and loop resistance, sensor trim against current trim, and an analog loop test on a Rosemount 3051
  • Precision Digitalthe full lesson on the fundamentals of 4-20 mA current loops
  • Fisher Valves & Instruments (Emerson)zero and span calibration of a Fisher 3582 positioner
  • Siemens Knowledge Hubconfiguring the SIPART PS2 valve positioner
  • Endress+Hausercommissioning Levelflex and Micropilot radar level instruments, and calibration interval optimisation
  • Spartan Controlsconfiguring a Rosemount 5300 guided-wave radar level transmitter
  • ECASthe wet-leg level transmitter's purpose and set-up, and how to read and navigate loop diagrams
  • Morehouse Instrument Companythe lessons on test uncertainty ratio and on accuracy against uncertainty
  • Mensorwhat k = 2 means on a calibration certificate
  • RJ Quality Consultingthe ISO/IEC 17025 calibration certificate requirements
  • Analog Devicesthe short lesson on thermocouple cold-junction compensation
  • Tim Wilbornehow to measure a 4-20 mA circuit without blowing the meter's fuse
  • Ashcroftthe calibration procedure for single set point pressure switches
  • ICxAthe difference between pre-commissioning and commissioning
  • IIQAinstrument commissioning questions from pre-commissioning to handover
  • Kistler Groupsetting the initial calibration interval and adjusting it

If you are one of these creators and would like a lesson removed or credited differently, write to info@edwartens.co.in.