Instrumentation · Free online course

P&ID Reading and Instrumentation Design Documents

Read any P&ID like an EPC engineer, then produce the instrument design documents a design office issues: ISA 5.1 symbols and tags, loops, interlocks and trips, line numbers and spec breaks, the instrument index and I/O list, datasheets, loop diagrams, hook-ups, junction box and cable schedules, layouts, vendor review and an overview of Intergraph Smart Instrumentation (SPI).

  • 13 modules
  • 11h 28m of video
  • Beginner
  • English
  • ₹0, free
  • Lab practice in your browser
P&ID Reading and Instrumentation Design Documents course cover

₹0Free for good

Worth ₹5,999 by length and depth against classroom training. It has always been free; that is not a former price.

No card. Checkout takes a minute and gives you a receipt.

Certificate ₹499, optional. The course is free either way.

Overview

About P&ID Reading and Instrumentation Design Documents

Read P&IDs the way an EPC engineer does, then produce instrument indexes, datasheets, loop diagrams and hook-ups.

P&ID Reading and Instrumentation Design Documents is a free, self-paced online course from EDWartens for EPC instrument design freshers, plant engineers and E&I designers in India and the Gulf. It has 13 modules and 11h 28m of video lessons, with written notes, a practice task per module, a practical project and a final assessment of 15 questions (pass mark 60%). Learning costs nothing and needs only a free account. The optional EDWartens Certificate of Completion, verifiable by code, is a one-off ₹499 inclusive of GST for learners in India; it is not a vendor credential. Updated 1 November 2026.

Who it is for: EPC instrument design freshers, plant engineers and E&I designers in India and the Gulf

This course includes

  • 11h 28m of video lessons
  • 13 modules with written notes and diagrams
  • One final assessment: 15 questions, pass mark 60%
  • Ask-an-engineer support from practising engineers
  • Lifetime access, the course does not expire
  • Optional verifiable certificate when you finish
  1. Step 1 of 3

    Learn the 13 modules

    11h 28m of video lessons, written notes and a practice task per module, at your own pace.

  2. Step 2 of 3

    Pass the final assessment

    15 questions drawn from every module, pass mark 60%, 3 attempts.

  3. Step 3 of 3

    Take the certificate, if you want it

    Optional, paid once, only if you choose it. The course stays free either way.

    See the certificate and its price

A look inside

P&ID Reading and Instrumentation Design Documents: Syllabus at a glance
Syllabus at a glance
P&ID Reading and Instrumentation Design Documents: What you will be able to do
What you will be able to do
P&ID Reading and Instrumentation Design Documents: Tools and credits
Tools and credits

From the lessons

  • Basics of BFDs, PFDs, & PIDs

    BFD, PFD and P&ID: who makes each and when

    by LearnChemE

  • Module 2 Training_How to Read P&IDs_Session 2

    Reading control loops, interlocks, SIS and alarms on a P&ID

    by InstruNexus

  • How to Prepare an Instrument Index | Inputs, Process & Outputs Explained Step-by-Step

    Instrument index and I/O list, with the DCS, SIS and fire and gas split

    by InstruNexus

  • The Complete Guide to Instrument Loop Diagrams | Design, Commissioning & Maintenance

    Loop diagrams (ISA 5.4)

    by InstruNexus

  • Instrumentation Junction Box Grouping: Practical Design Guidelines

    Junction box, marshalling and cable schedules

    by WOIN - World of Instrumentation

  • Engineering Discipline Deliverables - Basic Design, FEED & Detailed Design

    Vendor document review and the EPC deliverable flow (IFR, IFC)

    by eFunda Engineers

Lesson frames belong to the creators named in the Credits and are shown from YouTube.

What you learn

What you will be able to do

By the end you will be able to:

  • Decode ISA 5.1 tags and symbols
  • Trace control loops, interlocks and trips on a P&ID
  • Build an instrument index and an I/O list
  • Draw a loop diagram to ISA 5.4
  • Fill in an instrument datasheet and a cable schedule

How it works

How this course works

  1. Watch the lessons

    Short video lessons, one module at a time, at your own pace.

  2. Read the notes

    Open the Reading tab for the written notes and diagrams of the module.

  3. Practise in the 3D labOptional

    Try the module in the free 3D lab, in your browser.

  4. Check yourself

    Answer the questions to see what stuck before you move on.

  5. Final assessment

    Pass the final once you have been through the modules.

  6. Certificate, if you want oneOptional

    Optional, with a page anyone can use to verify it.

Syllabus

Course content, module by module

In order, at whatever pace suits you. Each module ends with a practice task that builds on the last.

Modules
13
Video lessons
36
Of video
11h 28m
Final questions
15
  1. 01

    BFD, PFD and P&ID: who makes each and when

    5 lessons · 32m
  2. 02

    ISA 5.1 symbols and tag numbers, with lab practice:

    3 lessons · 33m
  3. 03

    Reading control loops, interlocks, SIS and alarms on a P&ID, with lab practice:

    2 lessons · 1h 28m
  4. 04

    Valves, line numbers, piping specifications and spec breaks

    3 lessons · 25m
  5. 05

    Instrument index and I/O list, with the DCS, SIS and fire and gas split

    3 lessons · 1h 4m
  6. 06

    Instrument datasheets: ISA 20 and IEC 60534 style forms

    3 lessons · 43m
  7. 07

    Loop diagrams (ISA 5.4), with lab practice:

    3 lessons · 1h 13m
  8. 08

    Hook-up drawings and the bill of materials

    2 lessons · 1h 13m
  9. Final assessment · 15 questions, pass mark 60%

3D lab

Practise in the 3D lab

Read the tags and symbols of a process skid and check a 4 to 20 mA loop from the field to the PLC, as a loop drawing shows it.

Calibrate 4 to 20 mAWatch

Optional. Skip it whenever you like: it never blocks your progress or your certificate.

Project

The course project

Optional practice that ends in the kind of job the course prepares you for, with the documents that go with it.

About 10 hours

Instrument design pack for a production separator: P&ID sheet, index, I/O list, datasheet, loop diagram, hook-up and JB schedule

Redraw one P&ID sheet for a production separator from a line and tag schedule. Then produce the instrument documents a design office would issue for it. These are the index, the I/O list, a datasheet, a loop diagram, a hook-up and a junction box schedule.

This project at a glance
  1. 10documents in the pack
  2. 6steps to follow
  3. 7things to hand in
  4. 10 hof work, at your pace

Sample document pack, 10 documents, filled in for the scenario

  • ReportProcess data basis: V-101 separator
  • P&IDP&ID: production separator V-101, tag and line schedule
  • Instrument indexInstrument index: V-101 separator
  • I/O listI/O list: V-101 separator, DCS and SIS
  • DatasheetDatasheet: PT-1001 pressure transmitter
  • DatasheetDatasheet: LT-1002 guided wave radar level transmitter
  • Loop drawingLoop diagram: PT-1001
  • BOMHook-up HU-01: pressure transmitter, gas service, bill of materials
  • JB scheduleJunction box schedule: JB-101 (DCS)
  • JB scheduleJunction box schedule: JB-151 (SIS)

Read inside the course and download as a workbook. The project is optional practice, marked when you submit it; the certificate needs only the modules and the final assessment.

Tools

Software, hardware and lessons

Software

A spreadsheet and a drawing tool. draw.io (diagrams.net) and LibreOffice are free; QElectroTech or LibreCAD suit loop diagrams. AutoCAD or Intergraph Smart Instrumentation (SPI) are useful but not required.

Hardware

None.

Who it is for

Beginner to intermediate. For instrumentation, electrical and chemical engineering graduates, EPC design freshers and plant engineers. You should know what a transmitter and a control valve are; the 4 to 20 mA signal is explained where it is needed.

Video lessons by

  • InstruNexus
  • ProLytX
  • RealPars
  • Piping Technology
  • LearnChemE
  • Kimray Inc
  • HardHat Engineer
  • eFunda Engineers
  • Asad (I&C Engineer)
  • Amr Balbaa | Instrumentation & Control
  • Deanna Eldred
  • WOIN - World of Instrumentation
  • Offshore Engineering Academy

Independent creators, credited in full under Credits.

Software you need

What to download, where from, what it costs and how to install it. Every link goes to the maker's own site, never a mirror.

Nothing to install

A spreadsheet and a free drawing tool are enough for every deliverable; draw.io also runs in a web browser.

Optional

Useful, not needed to finish the course.

  1. 01

    draw.io (diagrams.net)

    JGraph

    Free
    Runs on
    Any modern web browser at app.diagrams.net; the desktop app is published for Windows, macOS and Linux on the drawio-desktop GitHub releases page
    Account
    None needed

    draw.io is free to use, and its source code is published under the Apache 2.0 licence. The desktop app works offline and saves files locally.

  2. 02

    LibreOffice

    The Document Foundation

    Free
    Runs on
    Windows 10 or 11, macOS 11 or newer (Intel or Apple silicon), Linux
    Account
    None needed
    Size
    up to 1.5 GB of disk space on Windows

    LibreOffice is free, open-source software under the Mozilla Public License 2.0, for any use including business. Calc is its spreadsheet.

    Official download pagelibreoffice.org

Checked against each maker's own page on 27 September 2026. Trial lengths and editions change; the maker's page is the final word.

What you walk away with

Your certificate for P&ID Reading and Instrumentation Design Documents

Finish the course, pass the final, and this is the document with your name on it.

Sample Wartens Certificate of Completion for P&ID Reading and Instrumentation Design Documents, issued through the EDWartens training portal
Sample. The issued certificate carries your name, your final score, a unique certificate ID and its own QR code.
  • Verifiable by anyone

  • Adds to LinkedIn in one click

  • QR code on the certificate

  • Names what you can do

  • A permanent link

  • Earned, not attended

Learning is free. The certificate is optional.

Add it now and pay only when you have finished the course, or come back for it later. One-off, US$23.99, with a receipt.

Issued by Wartens Ltd (England and Wales, company no. 15262249) through the EDWartens training portal, as a Certificate of Completion for this self-paced course. Sold in India by Wartens Automation Private Limited. It is not a vendor certification, a university award or a CPD-accredited activity, and it does not certify competence on live equipment. Delivered electronically; see the refund policy.

Practise what you learn in the free 3D lab

Technical work is judged on what you can do: wiring, commissioning, finding a fault. Doing a task yourself teaches more than watching it a second time, and a lab lets you try it safely before you meet real equipment. It does not replace working on real hardware.

  • Practise safely, so a mistake costs nothing.
  • The lab checks your work like a site test, so you know when it is right.
  • Free, in your browser, with nothing to install.

Why learn with EDWartens

What you get with this course.

  • Free from the first lesson to the final assessment.
  • Practice in a free 3D lab in your browser, with nothing to install.
  • Video lessons with written notes and a project.
  • An optional certificate that anyone can verify online.

FAQ

Common questions

Who is this P&ID and instrument design course for?

It is for instrumentation, electrical and chemical engineering graduates, EPC design freshers, plant engineers and E&I designers who need to read P&IDs and produce instrument design documents, in India or anywhere else EPC work is done.

What do I need to know before starting?

You need to know what a transmitter and a control valve are. The course explains the 4 to 20 mA signal where it is needed; if instruments are new to you, the Industrial Instrumentation and Process Control course is a good first step.

Which standards does the course follow?

It follows ANSI/ISA-5.1 for symbols and tags, ANSI/ISA-5.4 for loop diagrams, ISA-TR20.00.01 and IEC 60534-7 for datasheets, and refers to ISA-18.2, IEC 61511 and ASME B16.5 where they matter. Standard text is paraphrased; use the editions your project names.

Do I need SmartPlant Instrumentation (SPI) or AutoCAD?

No. Every exercise works in a spreadsheet and a free drawing tool such as draw.io. One module gives an overview of Intergraph Smart Instrumentation, formerly SmartPlant Instrumentation, which is licensed Hexagon software; the course is not SPI training.

How long does the P&ID Reading and Instrumentation Design Documents course take?

About 11.5 hours of video lessons and about 15 hours with the notes, worked problems and practice tasks, taken at your own pace. The optional project takes about 10 hours more.

Is the course free?

Yes. Every module, the notes, the practice tasks, the project and the final assessment are free to learn. The only paid item is the certificate, if you want it.

What certificate does the P&ID Reading and Instrumentation Design Documents course give?

An EDWartens Certificate of Completion, issued when you finish the modules and pass the 15-question final assessment at 60 percent, with a number anyone can verify on our site. It is not an ISA certification or a Hexagon SPI qualification.

What job does this lead to?

It teaches you to read P&IDs and to produce the instrument index, I/O list, datasheets, loop diagrams, hook-ups and JB schedules that EPC companies and design offices issue. Go on to Instrument Calibration, Loop Checks and Commissioning for the site side.

Do I have to use the lab?

No. The lab is optional practice. You can skip it whenever you like, and it never blocks your progress, the final assessment or your certificate.

Is the lab free?

Yes. Every lab level for this course opens in your browser, free, with nothing to install.

Is the P&ID Reading and Instrumentation Design Documents course free in India, and what does the certificate cost?

Yes. Learning costs ₹0 in India: every module, the written notes, the practice tasks and the final assessment, with no card and no trial period. The only paid item is the optional EDWartens Certificate of Completion, ₹499 including GST for this beginner course, paid in rupees through Razorpay, and only if you want it after passing the final assessment.

Is there classroom instrumentation training in India as well?

Yes. EDWartens India runs the Automation Engineer Program (AEP), a classroom programme at its Electronic City centre in Bangalore. The Automation Engineer Program (AEP) covers PLC, SCADA, HMI, drives, measuring instruments, PID basics and control panel design, taught in person at our Electronic City centre. This free course is separate and fully online; it is a good way to try the subject before deciding on classroom training. Details are at edwartens.co.in/automation-training-bangalore, and the programme itself at edwartens.co.in/courses/aep.

What topics does the P&ID Reading and Instrumentation Design Documents course cover, module by module?

The P&ID Reading and Instrumentation Design Documents course has 13 modules. It opens with "BFD, PFD and P&ID: who makes each and when", goes through "ISA 5.1 symbols and tag numbers", "Instrument index and I/O list, with the DCS, SIS and fire and gas split", "Junction box, marshalling and cable schedules" and "Smart Instrumentation (SPI): what the design database does, an overview" and ends with "Final Assessment". The full list with minutes is under "What you learn" on this page.

What can I do after the P&ID Reading and Instrumentation Design Documents course?

After the P&ID Reading and Instrumentation Design Documents course: Tell a BFD, a PFD and a P&ID apart and read a P&ID sheet in the right order; Decode any ISA 5.1 tag and symbol, including location and signal lines; Trace control loops, interlocks, SIS trips and alarm settings on a P&ID. These are the practical outcomes the course is written around, and the final assessment of 15 questions checks them.

What software and hardware do I need for the P&ID Reading and Instrumentation Design Documents course, and does it cost anything?

For the P&ID Reading and Instrumentation Design Documents course, software: A spreadsheet and a drawing tool. draw.io (diagrams.net) and LibreOffice are free; QElectroTech or LibreCAD suit loop diagrams. AutoCAD or Intergraph Smart Instrumentation (SPI) are useful but not required. Hardware: none. The course itself is free.

Is the P&ID Reading and Instrumentation Design Documents course suitable for me, and what level is it?

P&ID Reading and Instrumentation Design Documents is rated beginner. Beginner to intermediate. For instrumentation, electrical and chemical engineering graduates, EPC design freshers and plant engineers. You should know what a transmitter and a control valve are; the 4 to 20 mA signal is explained where it is needed. It is written for EPC instrument design freshers, plant engineers and E&I designers in India and the Gulf, and has 11h 28m of video lessons at your own pace.

Which jobs use the skills from the P&ID Reading and Instrumentation Design Documents course?

Skills from the P&ID Reading and Instrumentation Design Documents course (for example: tell a BFD, a PFD and a P&ID apart and read a P&ID sheet in the right order) are used in instrumentation design engineer work. The course gives you practical evidence of the skill; it does not promise a job, and employers decide on experience and interview.

All course facts
Price
₹0, free for good. No trial, no card. Comparable classroom training of this length costs about ₹5,999.
Who it is for
EPC instrument design freshers, plant engineers and E&I designers in India and the Gulf
Format
13 self-paced modules, 11h 28m of video, written notes, a practice task per module and one final assessment.
Level
Beginner. Beginner to intermediate. For instrumentation, electrical and chemical engineering graduates, EPC design freshers and plant engineers. You should know what a transmitter and a control valve are; the 4 to 20 mA signal is explained where it is needed.
Brand
Vendor-neutral
Software
A spreadsheet and a drawing tool. draw.io (diagrams.net) and LibreOffice are free; QElectroTech or LibreCAD suit loop diagrams. AutoCAD or Intergraph Smart Instrumentation (SPI) are useful but not required.
Hardware
None.
Certificate
Optional EDWartens Certificate of Completion, ₹499 inclusive of GST for learners in India, verifiable by code. Not a vendor credential.
Video lessons by
InstruNexus, ProLytX, RealPars, Piping Technology, LearnChemE, Kimray Inc, HardHat Engineer, eFunda Engineers, Asad (I&C Engineer), Amr Balbaa | Instrumentation & Control, Deanna Eldred, WOIN - World of Instrumentation, Offshore Engineering Academy (independent creators, credited below)
Language
English
Last updated
1 November 2026

More free courses: Free instrumentation and process control courses

Classroom course, Bangalore

Industrial automation course in Bangalore

The Automation Engineer Program (AEP) covers PLC, SCADA, HMI, drives, measuring instruments, PID basics and control panel design, taught in person at our Electronic City centre.

Credits

Who made the video lessons

The video lessons in this course were created by the people below, not by EDWartens. Every lesson streams from its creator's own YouTube channel; EDWartens neither hosts nor sells that footage, and the creators are not affiliated with EDWartens and do not endorse this course. What EDWartens wrote is the study plan, the notes, the practice tasks and the assessments.

  • InstruNexusthe lessons on ISA 5.1 symbols, the instrument index, I/O lists, loop diagrams and hook-up drawings, and the Module 2 training sessions on reading P&IDs, cause and effect matrices, I/O lists, control valve datasheets, loop diagrams, hook-ups, termination drawings, cable routing layouts and material requisitions
  • ProLytXthe SPI Boot Camp episodes on spec sheets, process data sheets, loop and tag creation, I/O loading, cables, wire connections and index reporting in Smart Instrumentation
  • RealParsthe lessons on how to read a P&ID and how to interpret DCS and PLC symbols on it
  • Piping Technologythe three-part series How to Read P&ID Diagrams: what a P&ID is, equipment and valve symbols, and a worked example
  • LearnChemEthe short lesson on the basics of BFDs, PFDs and P&IDs
  • Kimray Incthe lesson on reading an oil and gas P&ID with control valve symbols to ANSI/ISA 5.1
  • HardHat Engineerthe guide to pipe classes and piping specifications
  • Asad (I&C Engineer)the lesson on decoding a line number on a P&ID
  • Amr Balbaa | Instrumentation & Controlthe lesson on ISA-5.1 symbols, tag numbers and instrument identification
  • Deanna Eldredthe detailed walkthrough of instrumentation loop diagrams
  • WOIN - World of Instrumentationthe practical design guidelines for junction box grouping
  • Offshore Engineering Academythe lesson on vendor data and the inspection release certificate in EPCI procurement
  • eFunda Engineersthe lessons on engineering discipline deliverables from basic design and FEED to detailed design, and the overview of SmartPlant Instrumentation

If you are one of these creators and would like a lesson removed or credited differently, write to info@edwartens.co.in.