PLC programming · Free online course

PLC and Electrical Troubleshooting for Maintenance Teams

Find the fault fast on a machine you did not build: a method that goes from symptom to cause, safe isolation before you touch, drawings and I/O lists, meter work on 24 V DC control and motor circuits, sensors and 4-20 mA loops, online diagnostics in TIA Portal, Allen-Bradley and CODESYS, VFD and network faults, and fault reports that stop repeats.

  • 13 modules
  • 8h 48m of video
  • Beginner
  • English
  • ₹0, free
  • Lab practice in your browser
PLC and Electrical Troubleshooting for Maintenance Teams course cover

₹0Free for good

Worth ₹4,999 by length and depth against classroom training. It has always been free; that is not a former price.

No card. Checkout takes a minute and gives you a receipt.

Certificate ₹499, optional. The course is free either way.

Overview

About PLC and Electrical Troubleshooting for Maintenance Teams

Find faults fast on a machine you did not build, with a clear method, safe isolation, meter work and online PLC diagnostics.

PLC and Electrical Troubleshooting for Maintenance Teams is a free, self-paced online course from EDWartens for maintenance electricians, technicians and junior maintenance engineers who keep machines and production lines running. It has 13 modules and 8h 48m of video lessons, with written notes, a practice task per module, a practical project and a final assessment of 15 questions (pass mark 60%). Learning costs nothing and needs only a free account. The optional EDWartens Certificate of Completion, verifiable by code, is a one-off ₹499 inclusive of GST for learners in India; it is not a vendor credential. Updated 1 November 2026.

Who it is for: Maintenance electricians, technicians and junior maintenance engineers who keep machines and production lines running

This course includes

  • 8h 48m of video lessons
  • 13 modules with written notes and diagrams
  • One final assessment: 15 questions, pass mark 60%
  • Ask-an-engineer support from practising engineers
  • Lifetime access, the course does not expire
  • Optional verifiable certificate when you finish
  1. Step 1 of 3

    Learn the 13 modules

    8h 48m of video lessons, written notes and a practice task per module, at your own pace.

  2. Step 2 of 3

    Pass the final assessment

    15 questions drawn from every module, pass mark 60%, 3 attempts.

  3. Step 3 of 3

    Take the certificate, if you want it

    Optional, paid once, only if you choose it. The course stays free either way.

    See the certificate and its price

A look inside

PLC and Electrical Troubleshooting for Maintenance Teams: Syllabus at a glance
Syllabus at a glance
PLC and Electrical Troubleshooting for Maintenance Teams: What you will be able to do
What you will be able to do
PLC and Electrical Troubleshooting for Maintenance Teams: Tools and credits
Tools and credits

From the lessons

  • Work Smarter Not Harder- Technician Tips to Fix it Faster

    The fault-finding method: from symptom to cause

    by Greg Roche Automation

  • How to Read Electrical Drawings and Wiring Termination Drawings | Control Panel Wiring Tutorial

    Reading drawings and I/O lists in the field

    by Industrial Control Academy

  • Siemens PLC Troubleshooting a Normal Open Input

    Digital inputs: sensors, NPN, PNP and the input LED

    by KletteTech

  • 4-20mA Control Circuit Troubleshooting Part 2 | How to Read Electrical & PLC Control Drawings Faults

    Analog signals: 4-20 mA loop faults and scaling

    by Industrial Control Academy

  • How to Clear a Fault on a PLC

    Going online in Allen-Bradley, CCW and CODESYS

    by KletteTech

  • Diagnostics with PROFINET - simple, fast, reliable

    Network faults: PROFINET, EtherNet/IP and Modbus TCP

    by Siemens Knowledge Hub

Lesson frames belong to the creators named in the Credits and are shown from YouTube.

What you learn

What you will be able to do

By the end you will be able to:

  • Find faults with a repeatable method from symptom to root cause
  • Isolate and prove dead before touching
  • Test 24 V DC control circuits, contactors and sensors with a multimeter
  • Go online in TIA Portal, Allen-Bradley, CCW and CODESYS to read diagnostics
  • Write fault reports that stop repeat faults

How it works

How this course works

  1. Watch the lessons

    Short video lessons, one module at a time, at your own pace.

  2. Read the notes

    Open the Reading tab for the written notes and diagrams of the module.

  3. Practise in the 3D labOptional

    Try the module in the free 3D lab, in your browser.

  4. Check yourself

    Answer the questions to see what stuck before you move on.

  5. Final assessment

    Pass the final once you have been through the modules.

  6. Certificate, if you want oneOptional

    Optional, with a page anyone can use to verify it.

Syllabus

Course content, module by module

In order, at whatever pace suits you. Each module ends with a practice task that builds on the last.

Modules
13
Video lessons
41
Of video
8h 48m
Final questions
15
  1. 01

    The fault-finding method: from symptom to cause, with lab practice:

    3 lessons · 29m
  2. 02

    Before you touch: safe isolation and meter technique, with lab practice:

    3 lessons · 5m
  3. 03

    Reading drawings and I/O lists in the field

    2 lessons · 34m
  4. 04

    Control circuits: contactors, overloads and interlocks, with lab practice:

    5 lessons · 39m
  5. 05

    Digital inputs: sensors, NPN, PNP and the input LED, with lab practice:

    7 lessons · 43m
  6. 06

    Digital outputs: when the PLC says ON but nothing moves

    3 lessons · 58m
  7. 07

    Analog signals: 4-20 mA loop faults and scaling, with lab practice:

    2 lessons · 1h 14m
  8. 08

    Going online in Siemens TIA Portal without breaking anything

    3 lessons · 1h 6m
  9. Final assessment · 15 questions, pass mark 60%

3D lab

Practise in the 3D lab

Practise fault finding on a live control panel in the Panel Lab: observe, measure, isolate safely, repair and prove the fix with a test.

Isolate, lock and tagWatch

Optional. Skip it whenever you like: it never blocks your progress or your certificate.

Project

The course project

Optional practice that ends in the kind of job the course prepares you for, with the documents that go with it.

About 8 hours

A month of breakdowns on a bottling line: fault log, MTBF and Pareto, a motor fault report, a loop check and a root cause analysis

Take one month of call-outs from a bottling line and turn them into the records that stop faults coming back. You build a fault log with MTTR, MTBF, availability and a Pareto. You write a fault report on a motor that keeps tripping and a loop check after a 4-20 mA scaling fault. You finish with a 5 Whys on the photo-eye that stopped the line three times, and the preventive task that follows.

This project at a glance
  1. 5documents in the pack
  2. 5steps to follow
  3. 5things to hand in
  4. 8 hof work, at your pace

Sample document pack, 5 documents, filled in for the scenario

  • RegisterFault log and reliability summary: Line 3, March
  • ReportFault report: discharge conveyor motor M2 overload trips
  • Loop checkLoop check: PT-101 product pressure after rescaling
  • ReportRoot cause analysis: PE3 repeat stops on the infeed
  • ProcedurePreventive task: weekly check of washdown-zone sensors, Line 3

Read inside the course and download as a workbook. The project is optional practice, marked when you submit it; the certificate needs only the modules and the final assessment.

Tools

Software, hardware and lessons

Software

Siemens TIA Portal with S7-PLCSIM (21-day trial), Connected Components Workbench Standard Edition with its Micro800 Simulator (free) and the CODESYS Development System (free), plus a spreadsheet for the fault log. Studio 5000 is not free, so its screens are shown in the videos and the same skills are practised in CCW and CODESYS.

Hardware

None required: the PLC exercises run in simulation. A multimeter, and a clamp meter if you have one, let you practise the meter work on a 24 V DC supply and a sensor.

Who it is for

Beginner to intermediate. For maintenance electricians, technicians and junior maintenance engineers. You should know what a contactor, a sensor and a PLC are; Electrical Fundamentals for Technicians or Industrial Motor Control is the right course first if you do not.

Video lessons by

  • Greg Roche Automation
  • RealPars
  • The Electrical Guy
  • Martindale Electric
  • Fluke Corporation
  • Tim Wilborne
  • Industrial Control Academy
  • McNaughton-McKay Electric Company
  • KletteTech
  • TURCK USA
  • Aaron Dahlen
  • Ingus Sudints
  • Transcat
  • Dan Staifer
  • Siemens Knowledge Hub
  • Automation Consulting, LLC
  • SolisPLC
  • U.S. Drives and Automation Training
  • eMotors Direct
  • CaptiveAire
  • #FletchyFridays
  • Helmholz Benelux
  • EPM
  • Velaction Continuous Improvement

Independent creators, credited in full under Credits.

Software you need

What to download, where from, what it costs and how to install it. Every link goes to the maker's own site, never a mirror.

TIA Portal with PLCSIM is used for the Siemens diagnostics modules. Connected Components Workbench and CODESYS are free and cover the Allen-Bradley and CODESYS modules; a spreadsheet holds the fault log.

Required

  1. 01

    SIMATIC STEP 7 Professional and WinCC (TIA Portal) V21 Trial

    Siemens

    Free trial: 21 days
    Runs on
    Windows 11 Pro or Enterprise 64-bit (24H2), Windows 10 Enterprise 2021 LTSC, or Windows Server 2022/2025. Windows 11 Home is supported only for the Basic editions.
    Account
    A free Siemens account registered for Industry Online Support (SiePortal)
    Size
    about 8.1 GB for the main ISO, plus an optional 3.1 GB DVD 2 with hardware support packages

    Siemens lets registered users download the V21 trial of STEP 7 (Basic and Professional), STEP 7 Safety and WinCC and test it for 21 days. The same package is used for the full product; after 21 days you need a purchased licence to keep working.

    Official download pagesupport.industry.siemens.com

    Alternatives

    • TIA Portal Cloud trial: 21 days free in a cloud virtual machine, no install. Sessions are limited to one hour and it is not available in every country.
  2. 02

    S7-PLCSIM V21 (TIA Portal) Trial

    Siemens

    Free trial: 21 days
    Runs on
    Windows 11 Pro or Enterprise 64-bit (24H2), Windows 10 Enterprise 2021 LTSC, or Windows Server 2022/2025. Windows 11 Home is supported only for the Basic editions.
    Account
    A free Siemens account registered for Industry Online Support (SiePortal)
    Size
    about 2.5 GB (ISO)

    S7-PLCSIM V21 is offered as a 21-day trial on the same Siemens page as the STEP 7 and WinCC V21 trial. It needs STEP 7 V21 installed on the same PC.

    Official download pagesupport.industry.siemens.com

Optional

Useful, not needed to finish the course.

  1. 03

    Connected Components Workbench Standard Edition

    Rockwell Automation

    Free
    Runs on
    Windows 10 or 11 Pro or Enterprise 64-bit, or Windows Server 2019/2022
    Account
    A free Rockwell Automation account (sign in to the Product Compatibility and Download Center)

    The Standard Edition is free and needs no activation. It includes a demo version of the Micro800 Simulator; the full simulator comes with the paid Developer Edition.

    Official download pagecompatibility.rockwellautomation.com

    Alternatives

  2. 04

    CODESYS Development System V3

    CODESYS GmbH

    Free
    Runs on
    Windows 10 or 11, 64-bit (8 GB RAM and 12 GB free disk recommended)
    Account
    A free CODESYS Store account (one-time registration)

    The Development System is free in the CODESYS Store. The setup also installs a demo of the CODESYS Control Win SL SoftPLC, which runs for two hours without a licence and then needs a manual restart.

    Official download pagestore.codesys.com
  3. 05

    LibreOffice

    The Document Foundation

    Free
    Runs on
    Windows 10 or 11, macOS 11 or newer (Intel or Apple silicon), Linux
    Account
    None needed
    Size
    up to 1.5 GB of disk space on Windows

    LibreOffice is free, open-source software under the Mozilla Public License 2.0, for any use including business. Calc is its spreadsheet.

    Official download pagelibreoffice.org

Checked against each maker's own page on 27 September 2026. Trial lengths and editions change; the maker's page is the final word.

What you walk away with

Your certificate for PLC and Electrical Troubleshooting for Maintenance Teams

Finish the course, pass the final, and this is the document with your name on it.

Sample Wartens Certificate of Completion for PLC and Electrical Troubleshooting for Maintenance Teams, issued through the EDWartens training portal
Sample. The issued certificate carries your name, your final score, a unique certificate ID and its own QR code.
  • Verifiable by anyone

  • Adds to LinkedIn in one click

  • QR code on the certificate

  • Names what you can do

  • A permanent link

  • Earned, not attended

Learning is free. The certificate is optional.

Add it now and pay only when you have finished the course, or come back for it later. One-off, US$23.99, with a receipt.

Issued by Wartens Ltd (England and Wales, company no. 15262249) through the EDWartens training portal, as a Certificate of Completion for this self-paced course. Sold in India by Wartens Automation Private Limited. It is not a vendor certification, a university award or a CPD-accredited activity, and it does not certify competence on live equipment. Delivered electronically; see the refund policy.

Practise what you learn in the free 3D lab

Technical work is judged on what you can do: wiring, commissioning, finding a fault. Doing a task yourself teaches more than watching it a second time, and a lab lets you try it safely before you meet real equipment. It does not replace working on real hardware.

  • Practise safely, so a mistake costs nothing.
  • The lab checks your work like a site test, so you know when it is right.
  • Free, in your browser, with nothing to install.

Why learn with EDWartens

What you get with this course.

  • Free from the first lesson to the final assessment.
  • Practice in a free 3D lab in your browser, with nothing to install.
  • Video lessons with written notes and a project.
  • An optional certificate that anyone can verify online.

FAQ

Common questions

Who is this PLC troubleshooting course for?

It is for maintenance electricians, technicians and junior maintenance engineers who have to get machines running again, and for automation engineers who support production. You should know what a contactor, a sensor and a PLC are.

Is the course free to learn?

Yes. Every module, the notes, the worked problems, the project and the final assessment are free. The certificate is optional.

Do I need a real PLC or machine?

No. The PLC exercises run in simulation in TIA Portal with PLCSIM, Connected Components Workbench and CODESYS. A multimeter and a 24 V DC supply let you practise the meter work at home if you have them.

Which PLC brands does it cover?

Siemens S7-1200 and S7-1500 in TIA Portal, Allen-Bradley in Connected Components Workbench and Studio 5000 screens, and CODESYS-based controllers. The fault-finding method works on any brand.

Is it safe to force inputs and outputs while troubleshooting?

Only with authorisation and with the machine made safe. Forcing can start motion or hide a real fault, so the course teaches watch tables and cross-references first, and forces only under a permit and a site procedure.

What does the course teach about motors and VFDs?

Winding resistance, insulation resistance and polarisation index tests on motors, clamp-meter current checks, and how to read and act on the common VFD faults: overvoltage, overcurrent, ground fault and overload.

How long does the PLC and Electrical Troubleshooting course take?

About 14 hours in all at your own pace: about 9 hours of video, plus the notes and practice. The optional fault-log and root cause project takes about 8 hours more.

What certificate does the PLC and Electrical Troubleshooting course give?

An EDWartens certificate of completion, issued when you finish the modules and pass the 15-question final at 60 percent, with a number anyone can verify. It is not a Siemens, Rockwell or CODESYS certification.

Do I have to use the lab?

No. The lab is optional practice. You can skip it whenever you like, and it never blocks your progress, the final assessment or your certificate.

Is the lab free?

Yes. Every lab level for this course opens in your browser, free, with nothing to install.

Is the PLC and Electrical Troubleshooting course free in India, and what does the certificate cost?

Yes. Learning costs ₹0 in India: every module, the written notes, the practice tasks and the final assessment, with no card and no trial period. The only paid item is the optional EDWartens Certificate of Completion, ₹499 including GST for this beginner course, paid in rupees through Razorpay, and only if you want it after passing the final assessment.

Is there classroom PLC training in India as well?

Yes. EDWartens India runs the Automation Engineer Program (AEP), a classroom programme at its Electronic City centre in Bangalore. In the Automation Engineer Program (AEP) you write and test PLC programs on wired PLC panels, taught in person at our Electronic City centre. This free course is separate and fully online; it is a good way to try the subject before deciding on classroom training. Details are at edwartens.co.in/plc-training-bangalore, and the programme itself at edwartens.co.in/courses/aep.

What topics does the PLC and Electrical Troubleshooting course cover, module by module?

The PLC and Electrical Troubleshooting course has 13 modules. It opens with "The fault-finding method: from symptom to cause", goes through "Before you touch: safe isolation and meter technique", "Digital inputs: sensors, NPN, PNP and the input LED", "Going online in Allen-Bradley, CCW and CODESYS" and "Fault reports, root cause and stopping repeat faults" and ends with "Final Assessment". The full list with minutes is under "What you learn" on this page.

What can I do after the PLC and Electrical Troubleshooting course?

After the PLC and Electrical Troubleshooting course: Find faults with a repeatable method that goes from the symptom to the failed part and its root cause; Isolate and prove dead before touching, and justify every live test you make; Read drawings, cross-references and I/O lists on the shop floor. These are the practical outcomes the course is written around, and the final assessment of 15 questions checks them.

What software and hardware do I need for the PLC and Electrical Troubleshooting course, and does it cost anything?

For the PLC and Electrical Troubleshooting course, software: Siemens TIA Portal with S7-PLCSIM (21-day trial), Connected Components Workbench Standard Edition with its Micro800 Simulator (free) and the CODESYS Development System (free), plus a spreadsheet for the fault log. Studio 5000 is not free, so its screens are shown in the videos and the same skills are practised in CCW and CODESYS. Hardware: none required: the PLC exercises run in simulation. A multimeter, and a clamp meter if you have one, let you practise the meter work on a 24 V DC supply and a sensor. The course itself is free.

Is the PLC and Electrical Troubleshooting course suitable for me, and what level is it?

PLC and Electrical Troubleshooting is rated beginner. Beginner to intermediate. For maintenance electricians, technicians and junior maintenance engineers. You should know what a contactor, a sensor and a PLC are; Electrical Fundamentals for Technicians or Industrial Motor Control is the right course first if you do not. It is written for maintenance electricians, technicians and junior maintenance engineers who keep machines and production lines running, and has 8h 48m of video lessons at your own pace.

Which jobs use the skills from the PLC and Electrical Troubleshooting course?

Skills from the PLC and Electrical Troubleshooting course (for example: find faults with a repeatable method that goes from the symptom to the failed part and its root cause) are used in maintenance technician work. The course gives you practical evidence of the skill; it does not promise a job, and employers decide on experience and interview.

All course facts
Price
₹0, free for good. No trial, no card. Comparable classroom training of this length costs about ₹4,999.
Who it is for
Maintenance electricians, technicians and junior maintenance engineers who keep machines and production lines running
Format
13 self-paced modules, 8h 48m of video, written notes, a practice task per module and one final assessment.
Level
Beginner. Beginner to intermediate. For maintenance electricians, technicians and junior maintenance engineers. You should know what a contactor, a sensor and a PLC are; Electrical Fundamentals for Technicians or Industrial Motor Control is the right course first if you do not.
Brand
Vendor-neutral
Software
Siemens TIA Portal with S7-PLCSIM (21-day trial), Connected Components Workbench Standard Edition with its Micro800 Simulator (free) and the CODESYS Development System (free), plus a spreadsheet for the fault log. Studio 5000 is not free, so its screens are shown in the videos and the same skills are practised in CCW and CODESYS.
Hardware
None required: the PLC exercises run in simulation. A multimeter, and a clamp meter if you have one, let you practise the meter work on a 24 V DC supply and a sensor.
Certificate
Optional EDWartens Certificate of Completion, ₹499 inclusive of GST for learners in India, verifiable by code. Not a vendor credential.
Video lessons by
Greg Roche Automation, RealPars, The Electrical Guy, Martindale Electric, Fluke Corporation, Tim Wilborne, Industrial Control Academy, McNaughton-McKay Electric Company, KletteTech, TURCK USA, Aaron Dahlen, Ingus Sudints, Transcat, Dan Staifer, Siemens Knowledge Hub, Automation Consulting, LLC, SolisPLC, U.S. Drives and Automation Training, eMotors Direct, CaptiveAire, #FletchyFridays, Helmholz Benelux, EPM, Velaction Continuous Improvement (independent creators, credited below)
Language
English
Last updated
1 November 2026

More free courses: Free PLC programming courses

Classroom course, Bangalore

Learn PLC programming on wired panels in Bangalore

In the Automation Engineer Program (AEP) you write and test PLC programs on wired PLC panels, taught in person at our Electronic City centre.

Credits

Who made the video lessons

The video lessons in this course were created by the people below, not by EDWartens. Every lesson streams from its creator's own YouTube channel; EDWartens neither hosts nor sells that footage, and the creators are not affiliated with EDWartens and do not endorse this course. What EDWartens wrote is the study plan, the notes, the practice tasks and the assessments.

If you are one of these creators and would like a lesson removed or credited differently, write to info@edwartens.co.in.