PLC Brands You Should Know: A Training Guide for India

The short answer
Learn Siemens first, then Allen-Bradley, then whichever brand your target employers use. Those two cover a large share of the PLC work in Indian plants, and once ladder logic, timers, counters and scaling are solid on one of them, every other brand is mostly new software and new addressing. DCS platforms such as Yokogawa, Honeywell and Emerson DeltaV are a different class of system, not PLC brands.
The PLC brands you will meet in India
Brand | Controller families | Software |
|---|---|---|
Siemens | S7-1200, S7-1500 | TIA Portal |
Allen-Bradley (Rockwell) | CompactLogix, ControlLogix | Studio 5000 |
Mitsubishi | FX, iQ-R | GX Works3 |
Schneider Electric | Modicon M340, M580 | EcoStruxure Control Expert |
Delta | DVP, AS | ISPSoft, DIADesigner |
Omron | CP, CJ, NX | CX-Programmer, Sysmac Studio |
ABB | AC500 | Automation Builder |
Keyence | KV | KV Studio |
Beckhoff | TwinCAT | TwinCAT |
Where each one is common, and which to learn first for the job you want, is in which PLC brands to learn in India.
DCS platforms are not PLC brands
Yokogawa CENTUM VP, Honeywell Experion and Emerson DeltaV are distributed control systems: integrated systems built for continuous processes such as refining, chemicals and power. They are configured rather than programmed rung by rung, and they are learned mostly on the job or on the vendor's course. See DeltaV vs Experion vs CENTUM and PLC vs DCS.
What changes from one brand to the next
The logic is the same everywhere: a start button, a seal-in, an interlock and a timer mean the same thing on every PLC. What changes is how you point at a signal and how the software is organised.
Brand | How an input is addressed | How the program is organised |
|---|---|---|
Siemens | %I0.0, or a named tag | Organisation blocks, functions and function blocks |
Allen-Bradley | A named tag such as Local:1:I.Data.0 | Tasks, programs and routines |
Mitsubishi | X0 (inputs are numbered in octal on FX) | Program blocks and labels |
Omron | 0.00 on CP and CJ, named variables on NX | Tasks and sections |
Delta | X0 | Program organisation units in ISPSoft |
The first time you move brands, this is what slows you down: not the ladder logic, but finding where the software keeps things and how it names them. That is why the second brand takes days rather than months once the first one is solid. Our guide to program structure in Siemens and Rockwell walks through the two you are most likely to meet.
What to practise on each brand
You do not need the same depth on every brand. A sensible split for a fresher:
- Siemens, in depth: a full machine sequence with an HMI, analog scaling and a PID loop, built and fault-found end to end.
- Allen-Bradley, in depth: the same sequence rewritten in Studio 5000, with tags, routines and a FactoryTalk View screen.
- Mitsubishi, Delta or Omron, working knowledge: a start-stop circuit, a timer, a counter and going online to watch it run.
- Everything else, recognition: know the software name and how addressing works, so an interviewer's question about it does not catch you cold.
Interviewers in India rarely expect depth on every brand. They do expect you to be honest about which ones you know well and which you have only seen.
How to learn several brands without starting over
- Learn one platform properly: addressing, ladder logic, timers, counters, analog scaling, one HMI.
- Write the same small program on a second brand. Notice what changes (software, addressing, data types) and what does not (the logic).
- Learn the IEC 61131-3 languages, because most brands support them in some form. See IEC 61131-3 explained.
- Read PLC data types and addressing across brands before your second brand, not after.
Training on several brands at EDWartens
The Automation Engineer Program covers 20 PLC brands, including Siemens, Allen-Bradley, Mitsubishi, Delta, ABB and Schneider Electric. Siemens and Allen-Bradley are taught in depth; the others are taught so that what you already know carries across. DCS is covered separately, as concepts. The free Siemens TIA Portal course is a good first step before any classroom course.
For classroom practice, our PLC course in Bangalore: syllabus and duration sets out what is taught and for how long.
Frequently asked questions
Q: Which PLC brand is most used in India?
A: No public source publishes PLC market share for India. Siemens is the brand you will meet most often across Indian plants, with Allen-Bradley common in MNC and export plants and Mitsubishi in Japanese-owned plants and their suppliers.
Q: How many PLC brands should I learn?
A: Two in depth (usually Siemens and Allen-Bradley) and a working knowledge of one or two more is plenty for a first job.
Q: Is Honeywell a PLC brand?
A: Honeywell is best known in Indian plants for its Experion DCS, which is a distributed control system rather than a PLC. Treat it as DCS when you plan what to learn.
Learn this, free
The courses that teach this
Every lesson, the written notes and the practice are free with an account. Only the certificate is optional and paid.





